镇江大全赛雪龙牵引电气有限公司产品
声明：您必须遵守我们的协议，如果您下载了该资源行为将被视为对《电天下账号管理规范》全部内容的认可，本网站资源来自原创，仅供用于学习和交流，请勿用于商业用途。如有侵权、不妥之处，请举报本资源，我们将及时审核处理！
镇江大全赛雪龙牵引电气有限公司产品
文本预览
Switzerland Technology International Product
Company Profile
Changchun Urban Railway Phase 1 Project Nanjing Metro Phase 1 Project
Tianjing Urban Railway Line Jinbin Project Beijing Metro Line Batong Project
Wuhan Tramway Phase 1 Project Chongqing Tramway Line jiaoxin Phase 1 ProjectTianjin Metro Line 1 Project Tianjin Trolleybus test line Project
Guangzhuo Metro Line 4 Project Beijing Metro Line 1&2 Retrofit Project
Shanghai Metro Line 8 Project Beijing Metro Line 10 Project1
KMB
KMB Metal-enclosed DC Switchgear
2
MB
MB Metal-enclosed DC Switchgear
3
SECUB
SECUB Metal-enclosed DC Switchgear
4
NPMPD
NPMPD Over Voltage Limiting Device
5
SIK
SIK Prefabricated DC Traction Substation
6
UR & HPB
UR & HPB DC High-speed Circuit-breaker
7
SWS
SWS Disconnector
8
SEPCOS
SEPCOS Control and Protection System
9
MIU10
MIU10 Measuring AmplifierKMB
KMB Metal-enclosed DC Switchgear
1General
KMB metal-enclosed DC switchgear consists of incoming
cubicle (also called positive cubicle), feeder cubicle and
negative cubicle etc.
Incoming Cubicle
The incoming cubicle of the DC substation can be called posi-
tive cubicle, which is used between the rectifier and DC high-
speed breaker. The cubicle consists of DC disconnector or
HSCB, shunt, arrester, measure and control unit.
Feeder Cubicle
Feeder cubicle shall be installed between the positive busbar
and the point for connection of the Overhead Line(OHL). Inside
it, positive busbar, high-speed circuit-breaker and relevant con-
trol and protection components shall be provided.
The feeder cubicle is equipped with trolley type DC high-speed
circuit breaker. The trolley can be easily pulled out or moved in.
The trolley has three significant positions: Connected, Test and
Disconnected.
Feeder cubicles are metal-enclosed withdrawable switchgear.
It can be opened from the front or the rear of the cubicle with
lockable doors, allowing easy maintenance. The cubicle con-
sists of rear compartment, trolley compartment and low-voltage
compartment.
Negative Cubicle
Negative cubicle, which is equipped with motorized or manual
DC disconnector, is made of 2mm bent and reinforced steel
plates. In front and rear of the cubicle, the metal door can be
locked.
A set of a frame leakage protection device can be installed in
the negative cubicle to prevent personnel from injury due to
the flashover of the DC equipment by the damage of its inter-
nal insulation. It is mainly used for ensuring personal safety
and protection of the equipment against some special troubles.
Operation Conditions
Altitude: 2000m;
Temperature: -5 +40
Relative humidity:
Ambient air humidity shall not exceed 50% when the highest tem-
perature is +40 . But when the temperature is low, it allows consid-
erable relative humidity, for example, 90% at +20 ;
Installation condition:
During the installation of the equipment, the gradient shall not ex-
ceed 5 degree, and all of the switchgears shall be arranged orderly;
Installation site:
The switchgear should be installed at the site where are no acutely
strike or shake; in no case the equipment should be exposed to rain
or bad weather conditions.
1.1Main Features
High protection degree and perfect solution.
Integrated trolley with high speed circuit breaker and easy to
maintenance.
Disconnectors or reversing switches are accessible and suit
able for operation from the cubicle front or rear side.
Integrated protection and control system type SEPCOS,
allowing both remote control and remote monitoring from
the traction network control centre.
The control and protection compartment is accessible from
the cubicle front side.
Technical data
KMB06 KMB08 KMB08
Type 26 40 46 60 26 40
(A) 2000-3150 4000-9000 4000-9000 6000-9000 2000-3150 4000-6000
Rated current bus-bar
(A) 2600 4000 4600 6000 2600 4000
Rated current feeder circuit
Ui 1600V/3000V 4800V
Company Profile
Changchun Urban Railway Phase 1 Project Nanjing Metro Phase 1 Project
Tianjing Urban Railway Line Jinbin Project Beijing Metro Line Batong Project
Wuhan Tramway Phase 1 Project Chongqing Tramway Line jiaoxin Phase 1 ProjectTianjin Metro Line 1 Project Tianjin Trolleybus test line Project
Guangzhuo Metro Line 4 Project Beijing Metro Line 1&2 Retrofit Project
Shanghai Metro Line 8 Project Beijing Metro Line 10 Project1
KMB
KMB Metal-enclosed DC Switchgear
2
MB
MB Metal-enclosed DC Switchgear
3
SECUB
SECUB Metal-enclosed DC Switchgear
4
NPMPD
NPMPD Over Voltage Limiting Device
5
SIK
SIK Prefabricated DC Traction Substation
6
UR & HPB
UR & HPB DC High-speed Circuit-breaker
7
SWS
SWS Disconnector
8
SEPCOS
SEPCOS Control and Protection System
9
MIU10
MIU10 Measuring AmplifierKMB
KMB Metal-enclosed DC Switchgear
1General
KMB metal-enclosed DC switchgear consists of incoming
cubicle (also called positive cubicle), feeder cubicle and
negative cubicle etc.
Incoming Cubicle
The incoming cubicle of the DC substation can be called posi-
tive cubicle, which is used between the rectifier and DC high-
speed breaker. The cubicle consists of DC disconnector or
HSCB, shunt, arrester, measure and control unit.
Feeder Cubicle
Feeder cubicle shall be installed between the positive busbar
and the point for connection of the Overhead Line(OHL). Inside
it, positive busbar, high-speed circuit-breaker and relevant con-
trol and protection components shall be provided.
The feeder cubicle is equipped with trolley type DC high-speed
circuit breaker. The trolley can be easily pulled out or moved in.
The trolley has three significant positions: Connected, Test and
Disconnected.
Feeder cubicles are metal-enclosed withdrawable switchgear.
It can be opened from the front or the rear of the cubicle with
lockable doors, allowing easy maintenance. The cubicle con-
sists of rear compartment, trolley compartment and low-voltage
compartment.
Negative Cubicle
Negative cubicle, which is equipped with motorized or manual
DC disconnector, is made of 2mm bent and reinforced steel
plates. In front and rear of the cubicle, the metal door can be
locked.
A set of a frame leakage protection device can be installed in
the negative cubicle to prevent personnel from injury due to
the flashover of the DC equipment by the damage of its inter-
nal insulation. It is mainly used for ensuring personal safety
and protection of the equipment against some special troubles.
Operation Conditions
Altitude: 2000m;
Temperature: -5 +40
Relative humidity:
Ambient air humidity shall not exceed 50% when the highest tem-
perature is +40 . But when the temperature is low, it allows consid-
erable relative humidity, for example, 90% at +20 ;
Installation condition:
During the installation of the equipment, the gradient shall not ex-
ceed 5 degree, and all of the switchgears shall be arranged orderly;
Installation site:
The switchgear should be installed at the site where are no acutely
strike or shake; in no case the equipment should be exposed to rain
or bad weather conditions.
1.1Main Features
High protection degree and perfect solution.
Integrated trolley with high speed circuit breaker and easy to
maintenance.
Disconnectors or reversing switches are accessible and suit
able for operation from the cubicle front or rear side.
Integrated protection and control system type SEPCOS,
allowing both remote control and remote monitoring from
the traction network control centre.
The control and protection compartment is accessible from
the cubicle front side.
Technical data
KMB06 KMB08 KMB08
Type 26 40 46 60 26 40
(A) 2000-3150 4000-9000 4000-9000 6000-9000 2000-3150 4000-6000
Rated current bus-bar
(A) 2600 4000 4600 6000 2600 4000
Rated current feeder circuit
Ui 1600V/3000V 4800V
AIGC您好，关于"镇江大全赛雪龙牵引电气有限公司产品"，这家公司可能专注于生产或提供电气设备，特别是与牵引系统相关的电力解决方案。牵引电气通常应用于火车、地铁或其他交通工具的电力驱动系统中，可能包括电机、变流器、控制设备、电缆和配件等。
他们的产品可能包括高效能的牵引电机，用于电动车辆的电力驱动；变频器，帮助调节电机转速以适应不同行驶条件；以及各种电力控制系统，确保车辆的安全运行和能源管理。如果您需要了解具体的产品信息，如型号、特性、技术参数或者价格，建议直接访问公司官网，或者联系他们的客户服务团队获取详细资料。
