CS-3000支撑系统
声明：您必须遵守我们的协议，如果您下载了该资源行为将被视为对《电天下账号管理规范》全部内容的认可，本网站资源来自原创，仅供用于学习和交流，请勿用于商业用途。如有侵权、不妥之处，请举报本资源，我们将及时审核处理！
CS-3000支撑系统.
文本预览
Support system CS-3000
Flexible, easy to assemble, ergonomicalNew flexibility in operation and observation:
the Bernstein CS-3000
Inthe main, system constructors demand from modern support Thanks to the particular ease of assembly of the CS-3000, the
systems variability in the system's configuration, an advanced design amount of assembly work is also reduced, which for the system
and absolute ease of assembly. Bernstein is setting new standards constructor means great time savings and cost reductions:
here with the new CS-3000: A modern industrial design, well
thought-through ergonomics and many combinable components •In addition to the non-positive connection of the tube fastening
create an innovative system solution on the modular principle. screws: Sixfold positive connection via component contour in the
tube's attachment area (the otherwise optional additional safety
•Long service life and safe operation thanks to anodised aluminium hole for overhead mounting is not required/photo 2)
tubes •One person can install the complete system
•No more dirty edges, thanks to smooth transitions between the •Stepless adjustment for system alignment by means of the tube
tube and other components (very easy to clean/photo 1) fastening screws
•Coated tube fastening screws for sealing the thread holes and for •Readjustment is possible at any time without disassembling the
secure screw connections complete system (photo 3)
•Filigree appearance and connection of narrow profiles thanks to •Cable and assembly openings at all deflection points in the system
the possibility of reducing the cross section from the square to the •Tubes machined at one end so that you can cut them to the
round tube required length (machining templates supplied)
•Modular upgrading of the couplings is possible (also subsequently), •Different tube lengths offer the possibility of variability in assembly
e.g. with adapter for narrow housing or angle adapter •Adjustable torque (stiffness) of all rotating components (rough
•Protection IP 65 adjustment), fine adjustment with clamping lever or screw
•Well thought-through ergonomics for simple and virtually fatigue-
free operation
•An ideal solution from a single source for Bernstein control housing
Fließende Übergänge durch intelligentes Design Zusätzlicher 6-facher Formschluss durch Kompo- Jederzeit, problemlose Nachjustage möglich – ohne
bieten hohe Reinigungsfreundlichkeit nentenkontur im Aufsteckbereich des Rohres Demontage des Komplettsystems
Application example, support system CS-3000
The numerous modules and components of
the CS-3000 allow a flexible system assembly.
Even the most angled channels on systems
and machines can be created. This versatility
is unique on the market!
2Angle Intermediate joint
Coupling
Load diagramTop joint
Tube cross sections
Materials
•Anodised aluminium tubes
•Die-cast aluminium components
•Polyamide covers for assembly opening
•POM bearing
•Neoprene seals
Colours
•Support system components: anthracite grey/RAL 7016
•Connecting tubes: silver (natural) anodisedCoupling Art. No. 101.5300.001
Rotary angle 300°with stop.
(The adapter 101.5300.011 is required
for connection to profiles <120 mm)
Angle coupling Art. No. 101.5300.002
rotary angle 300°with stop,
assembly opening incl.
screw-fit plastic cover
Tilting coupling 15°A/B A=Art. No. 101.5300.013
Rotary angle 300°with stop,
fixed incline of 15°
Variant A inclined back
Variant B inclined forward
B=Art. No. 101.5300.014
Tilting angle coupling 15°A/B A=Art. No. 101.5300.015
Rotary angle 300°with stop,
fixed incline of 15°, assembly opening
incl. screw-fit plastic cover
Variant A inclined back
Variant B inclined forward
B=Art. No. 101.5300.016
Stand coupling Art. No. 101.5300.017
Rotary angle 300°with stop
Inclined stand coupling A=Art. No. 101.5300.018
15°A/B
rotary angle 300°with stop,
fixed incline of 15°
Variant A inclined back
Variant B inclined forward
B=Art. No. 101.5300.019
Dimensioned drawings and installation instructions
6 can be easily downloaded from: www.bernstein.euCoupling 48 Art. No. 101.3050.000
Rotary angle 300°with stop, only
compatible with the 48 mm round tube,
the adapter 980.652.000 is required for
connecting to the 80 mm profile
Angle reduced RD 48 Art. No. 101.5300.020
Reducing angle from the square tube
to the 48 mm round tube
Angle Art. No. 101.5300.008
with assembly opening incl.
screw-fit plastic cover
Rotary angle Art. No. 101.5300.009
Rotary angle 300°with stop,
assembly opening incl.
screw-fit plastic cover
Incline adapter (stepless 30°) Art. No. 101.5300.012
May only be used in conjunction
with couplings, stepless incline
adjustable up to 30°,
not compatible with 101.305.000,
max. load-bearing capacity 300 N
Adapter (narrow profile) Art. No. 101.5300.011
May only be used in conjunction
with couplings.
Flexible, easy to assemble, ergonomicalNew flexibility in operation and observation:
the Bernstein CS-3000
Inthe main, system constructors demand from modern support Thanks to the particular ease of assembly of the CS-3000, the
systems variability in the system's configuration, an advanced design amount of assembly work is also reduced, which for the system
and absolute ease of assembly. Bernstein is setting new standards constructor means great time savings and cost reductions:
here with the new CS-3000: A modern industrial design, well
thought-through ergonomics and many combinable components •In addition to the non-positive connection of the tube fastening
create an innovative system solution on the modular principle. screws: Sixfold positive connection via component contour in the
tube's attachment area (the otherwise optional additional safety
•Long service life and safe operation thanks to anodised aluminium hole for overhead mounting is not required/photo 2)
tubes •One person can install the complete system
•No more dirty edges, thanks to smooth transitions between the •Stepless adjustment for system alignment by means of the tube
tube and other components (very easy to clean/photo 1) fastening screws
•Coated tube fastening screws for sealing the thread holes and for •Readjustment is possible at any time without disassembling the
secure screw connections complete system (photo 3)
•Filigree appearance and connection of narrow profiles thanks to •Cable and assembly openings at all deflection points in the system
the possibility of reducing the cross section from the square to the •Tubes machined at one end so that you can cut them to the
round tube required length (machining templates supplied)
•Modular upgrading of the couplings is possible (also subsequently), •Different tube lengths offer the possibility of variability in assembly
e.g. with adapter for narrow housing or angle adapter •Adjustable torque (stiffness) of all rotating components (rough
•Protection IP 65 adjustment), fine adjustment with clamping lever or screw
•Well thought-through ergonomics for simple and virtually fatigue-
free operation
•An ideal solution from a single source for Bernstein control housing
Fließende Übergänge durch intelligentes Design Zusätzlicher 6-facher Formschluss durch Kompo- Jederzeit, problemlose Nachjustage möglich – ohne
bieten hohe Reinigungsfreundlichkeit nentenkontur im Aufsteckbereich des Rohres Demontage des Komplettsystems
Application example, support system CS-3000
The numerous modules and components of
the CS-3000 allow a flexible system assembly.
Even the most angled channels on systems
and machines can be created. This versatility
is unique on the market!
2Angle Intermediate joint
Coupling
Load diagramTop joint
Tube cross sections
Materials
•Anodised aluminium tubes
•Die-cast aluminium components
•Polyamide covers for assembly opening
•POM bearing
•Neoprene seals
Colours
•Support system components: anthracite grey/RAL 7016
•Connecting tubes: silver (natural) anodisedCoupling Art. No. 101.5300.001
Rotary angle 300°with stop.
(The adapter 101.5300.011 is required
for connection to profiles <120 mm)
Angle coupling Art. No. 101.5300.002
rotary angle 300°with stop,
assembly opening incl.
screw-fit plastic cover
Tilting coupling 15°A/B A=Art. No. 101.5300.013
Rotary angle 300°with stop,
fixed incline of 15°
Variant A inclined back
Variant B inclined forward
B=Art. No. 101.5300.014
Tilting angle coupling 15°A/B A=Art. No. 101.5300.015
Rotary angle 300°with stop,
fixed incline of 15°, assembly opening
incl. screw-fit plastic cover
Variant A inclined back
Variant B inclined forward
B=Art. No. 101.5300.016
Stand coupling Art. No. 101.5300.017
Rotary angle 300°with stop
Inclined stand coupling A=Art. No. 101.5300.018
15°A/B
rotary angle 300°with stop,
fixed incline of 15°
Variant A inclined back
Variant B inclined forward
B=Art. No. 101.5300.019
Dimensioned drawings and installation instructions
6 can be easily downloaded from: www.bernstein.euCoupling 48 Art. No. 101.3050.000
Rotary angle 300°with stop, only
compatible with the 48 mm round tube,
the adapter 980.652.000 is required for
connecting to the 80 mm profile
Angle reduced RD 48 Art. No. 101.5300.020
Reducing angle from the square tube
to the 48 mm round tube
Angle Art. No. 101.5300.008
with assembly opening incl.
screw-fit plastic cover
Rotary angle Art. No. 101.5300.009
Rotary angle 300°with stop,
assembly opening incl.
screw-fit plastic cover
Incline adapter (stepless 30°) Art. No. 101.5300.012
May only be used in conjunction
with couplings, stepless incline
adjustable up to 30°,
not compatible with 101.305.000,
max. load-bearing capacity 300 N
Adapter (narrow profile) Art. No. 101.5300.011
May only be used in conjunction
with couplings.
AIGCCS-3000（Control System - 3000）是 Honeywell （霍尼韦尔）公司推出的一款高端、成熟的集散控制系统（DCS, Distributed Control System），它专为过程工业设计，提供了全面的控制和监控解决方案。该支撑系统通常包括一系列功能强大的控制器、人机界面站（HMI）、工程师工作站（ESD/PLC）、通信网络以及高级应用软件模块，这些组件协同工作以实现对生产过程的高效自动化管理。
在CS-3000系统中，控制器可能采用冗余配置，如Single Point of Operation (SPO) 或 Redundant Control Module (RCM)，确保了高可用性和数据安全性。HMI 屏幕提供实时的工艺参数显示、操作员界面以及报警信息处理，而ESD/PLC则支持逻辑控制与顺序控制，实现了对复杂生产流程的精确控制。此外，其开放的以太网通讯协议允许与其他系统无缝集成，并通过 Advanced Process Management (APM) 等高级应用软件实现更深层次的过程优化和分析。
总之，CS-3000支撑系统是一种高度集成、功能完善的工业自动化解决方案，广泛应用于石油、化工、能源、制药等多个领域的重要生产装置中。
