华鹏 干式变压器产品手册
声明：您必须遵守我们的协议，如果您下载了该资源行为将被视为对《电天下账号管理规范》全部内容的认可，本网站资源来自原创，仅供用于学习和交流，请勿用于商业用途。如有侵权、不妥之处，请举报本资源，我们将及时审核处理！
华鹏 干式变压器产品手册
文本预览
江苏华鹏变压器有限公司干式变压器产品特点介绍
An Introduction to the Features of Huapeng Dry-type Transformers
我公司生产的 SC(B)10 型产品为国内首批领有产品型号证书的低噪声低损耗树脂浇注
线圈干式变压器。我公司生产的SC(H)B11型干式电力变压器，是在GB/T10228-2008《干式
电力变压器技术参数和要求》基础上把空载损耗降低 20%以上、负载损耗降低 5%以上的、
绝缘等级为 H 级、低噪声、低损耗的产品。由于先进的设计，优质的材料，科学的配方，
严格的工艺和高标准的检测，使产品具有如下特点：
Huapeng is the first company which is issued the type certification of low-noise,
low-loss cast-resin dry-type transformers in China. Our dry-type transformers have more
than 20% reduction in the no-load loss, 5% reduction in the load loss of GB/T10228-2008,
H class insulation, and low-noise level. The advanced design, qualified materials,
scientific formula, strict process, and high standard test ensure the transformers to have
following characteristics:
1. 高低压绕组均采用玻璃纤维毡填充包绕，真空状态下用不加填料的环氧树脂浇注，固化
后形成坚固的圆筒形整体，机械强度高，局部放电小，可靠性高。
Both the HV and LV windings are surrounded and filled by glass fiber mats, no filler
in epoxy resin during casting under vacuum condition. The windings will be solidified
to form a solid cylindrical overall, with high mechanical strength and high reliability
and no partial discharge.
2. 阻燃、防爆、不污染环境。缠绕线圈的玻璃纤维等绝缘材料具有自熄特性，不会因短路
产生电弧，高热下树脂不会产生有毒有害气体。
Fire and explosion proof, do not pollute the environment. Coil winding insulation
materials such as glass fiber with self-extinguishing properties, and will not arcing
when short-circuit happened; heat the resin will not produce toxic or harmful gases.
3. 线圈不吸潮，铁心夹件有特殊的防蚀保护层，可在93%相对湿度以下及其他恶劣环境中
运行。间断运行无须去潮处理。
Coil does not absorb moisture, core clamps have a special corrosion protection layer,
and transformers can be abnormally running in the 93% relative humiditycondition.
1No need special treatment during intermittent service.
4. 抗短路、雷电冲击水平高。
High short circuit withstanding capability and lightning impulse level.
5. 线圈内外侧树脂层薄，散热性能好。冷却方式一般采用空气自然冷却（AN）。对于任何
防护等级的变压器，都可配置风冷系统（AF），以提高短时过载能力，确保安全运行。
Thin resin in both inner and outer of coil can ensure good heat dissipation. Normally
the transformer is air cooling type (AN). Force air cooling type (AF) can be used on
any transformer, in order to improve short-term overload capacity, to ensure safety
operation.
6. 损耗低，节能效果好，运行经济，可免维护。
Lower loss level and save energycan reduce the running cost, and all transformers are
maintenance-free.
7. 体积小，重量轻，占地空间小，安装费用低，不须考虑排油地、防火消防设施和备用电
源等。
Small size, light weight, small floor space, low cost of installation, no need to consider
the discharge of oil, fire and other fire control facilities and standby power.
8. 因无火灾、爆炸之虞，可分散装在负荷中心，充分靠近用电点，从而可以降低线路造价、
节省昂贵的低压设施费用。
Because there is no fire and explosion possibility, it can be easilyinstalled in anyplace
of load center and fully close to the power consumption equipment, thus reducing the
loss on the transmission line.
210kV 级 SC10-30～1000kVA 配电变压器
SC10-30~1000kVA10kVDistributionTransformers
1.型号标志 SC 10 –xxxx /xx
Typedesignation
高压电压等级/HVClass(kV)
额定容量/Ratedcapacity(kVA)
性能水平代号/Performancestandardcode
三相环氧浇注/3phaseresin-encapsulated
2.产品标准 GB/T10228，GB1094.11，IEC60076，DIN42523
Standards
额定高压(RatedHV)：10(11、10.5、6.6、6.3、6)kV 联结组别(Connectionsymbol)：Dyn11orYyn0
额定低压(RatedLV)：0.4kV 绝缘水平(Insulationlevel)：LI75AC35/AC3
低压
型 号 P 0 P k I 0 U k L PA Gt 尺 寸 Dimensions(mm) 端子
Type (W) (W) % % dB(A) kg L W H d e f g h i K1 s D LV
Terminals
SC10-30/10 200 620 2.0 44 300 820 630 750 550 782 708 225 327 280 150 50 14 a
SC10-50/10 280 870 1.8 44 400 820 630 841 550 872 799 228 328 280 150 50 14 a
SC10-80/10 370 1210 1.4 44 475 900 630 870 550 902 829 237 338 305 150 50 14 a
SC10-100/10 400 1380 1.2 44 600 940 630 900 550 932 858 245 345 320 150 50 14 a
SC10-125/10 470 1620 1.0 48 660 940 630 980 550 1013 938 245 345 320 150 50 14 a
SC10-160/10 540 1860 0.8 48 790 1040 630 988 550 1044 946 261 361 350 150 50 14 b
4
SC10-200/10 620 2210 0.7 48 850 1040 630 988 550 1044 946 261 361 350 150 50 14 b
SC10-250/10 720 2410 0.7 48 1010 1070 750 1058 660 1104 1006 268 369 360 200 62 18 b
SC10-315/10 880 3030 0.6 48 1220 1130 750 1078 660 1139 1026 279 378 380 200 62 18 c
SC10-400/10 980 3480 0.6 48 1450 1180 750 1158 660 1219 1106 283 381 395 200 62 18 c
SC10-500/10 1160 4260 0.5 50 1750 1230 750 1293 660 1354 1239 286 384 415 200 62 18 c
SC10-630/10 1340 5130 0.5 50 2000 1290 750 1348 660 1409 1296 297 393 435 200 62 18 d
SC10-630/10 1300 5200 0.5 50 2100 1380 750 1278 660 1338 1225 301 397 465 240 62 18 d
SC10-800/10 1520 6070 0.4 6 50 2450 1460 910 1318 820 1390 1255 339 410 490 270 58 18 e
SC10-1000/10 1770 7100 0.4 50 2700 1490 910 1413 820 1485 1350 346 413 500 270 58 18 f
上表所列的外形尺寸仅供设计选型参考，最终尺寸以外形图为准。
Theoveralldimensionslistedintheabovetableareonlyforreference,thefinaldimensionswillbeindicatedin
theoutlinedrawingsupplied.
310kV 级 SC10-30～1000kVA 配电变压器外形尺寸图
SC10-30~1000kVA10kVDistributionTransformer Outline Drawing
低压端子图
LVTerminal Dimensions
410kV 级 SCB10-630～3150kVA 配电变压器
SCB10-630~3150kVA10kVDistributionTransformers
1.型号标志 SC B 10 –xxxx/ xx
Typedesignation
高压电压等级/HVClass(kV)
额定容量/Ratedcapacity(kVA)
性能水平代号/Performancestandardcode
低压箔式线圈/LVfoil-typewinding
三相环氧浇注/3phaseresin-encapsulated
2.产品标准 GB/T10228，GB1094.11，IEC60076，DIN42523
Standards
额定高压(RatedHV)：10(11、10.5、6.6、6.3、6)kV 联结组别(Connectionsymbol)：Dyn11orYyn0
An Introduction to the Features of Huapeng Dry-type Transformers
我公司生产的 SC(B)10 型产品为国内首批领有产品型号证书的低噪声低损耗树脂浇注
线圈干式变压器。我公司生产的SC(H)B11型干式电力变压器，是在GB/T10228-2008《干式
电力变压器技术参数和要求》基础上把空载损耗降低 20%以上、负载损耗降低 5%以上的、
绝缘等级为 H 级、低噪声、低损耗的产品。由于先进的设计，优质的材料，科学的配方，
严格的工艺和高标准的检测，使产品具有如下特点：
Huapeng is the first company which is issued the type certification of low-noise,
low-loss cast-resin dry-type transformers in China. Our dry-type transformers have more
than 20% reduction in the no-load loss, 5% reduction in the load loss of GB/T10228-2008,
H class insulation, and low-noise level. The advanced design, qualified materials,
scientific formula, strict process, and high standard test ensure the transformers to have
following characteristics:
1. 高低压绕组均采用玻璃纤维毡填充包绕，真空状态下用不加填料的环氧树脂浇注，固化
后形成坚固的圆筒形整体，机械强度高，局部放电小，可靠性高。
Both the HV and LV windings are surrounded and filled by glass fiber mats, no filler
in epoxy resin during casting under vacuum condition. The windings will be solidified
to form a solid cylindrical overall, with high mechanical strength and high reliability
and no partial discharge.
2. 阻燃、防爆、不污染环境。缠绕线圈的玻璃纤维等绝缘材料具有自熄特性，不会因短路
产生电弧，高热下树脂不会产生有毒有害气体。
Fire and explosion proof, do not pollute the environment. Coil winding insulation
materials such as glass fiber with self-extinguishing properties, and will not arcing
when short-circuit happened; heat the resin will not produce toxic or harmful gases.
3. 线圈不吸潮，铁心夹件有特殊的防蚀保护层，可在93%相对湿度以下及其他恶劣环境中
运行。间断运行无须去潮处理。
Coil does not absorb moisture, core clamps have a special corrosion protection layer,
and transformers can be abnormally running in the 93% relative humiditycondition.
1No need special treatment during intermittent service.
4. 抗短路、雷电冲击水平高。
High short circuit withstanding capability and lightning impulse level.
5. 线圈内外侧树脂层薄，散热性能好。冷却方式一般采用空气自然冷却（AN）。对于任何
防护等级的变压器，都可配置风冷系统（AF），以提高短时过载能力，确保安全运行。
Thin resin in both inner and outer of coil can ensure good heat dissipation. Normally
the transformer is air cooling type (AN). Force air cooling type (AF) can be used on
any transformer, in order to improve short-term overload capacity, to ensure safety
operation.
6. 损耗低，节能效果好，运行经济，可免维护。
Lower loss level and save energycan reduce the running cost, and all transformers are
maintenance-free.
7. 体积小，重量轻，占地空间小，安装费用低，不须考虑排油地、防火消防设施和备用电
源等。
Small size, light weight, small floor space, low cost of installation, no need to consider
the discharge of oil, fire and other fire control facilities and standby power.
8. 因无火灾、爆炸之虞，可分散装在负荷中心，充分靠近用电点，从而可以降低线路造价、
节省昂贵的低压设施费用。
Because there is no fire and explosion possibility, it can be easilyinstalled in anyplace
of load center and fully close to the power consumption equipment, thus reducing the
loss on the transmission line.
210kV 级 SC10-30～1000kVA 配电变压器
SC10-30~1000kVA10kVDistributionTransformers
1.型号标志 SC 10 –xxxx /xx
Typedesignation
高压电压等级/HVClass(kV)
额定容量/Ratedcapacity(kVA)
性能水平代号/Performancestandardcode
三相环氧浇注/3phaseresin-encapsulated
2.产品标准 GB/T10228，GB1094.11，IEC60076，DIN42523
Standards
额定高压(RatedHV)：10(11、10.5、6.6、6.3、6)kV 联结组别(Connectionsymbol)：Dyn11orYyn0
额定低压(RatedLV)：0.4kV 绝缘水平(Insulationlevel)：LI75AC35/AC3
低压
型 号 P 0 P k I 0 U k L PA Gt 尺 寸 Dimensions(mm) 端子
Type (W) (W) % % dB(A) kg L W H d e f g h i K1 s D LV
Terminals
SC10-30/10 200 620 2.0 44 300 820 630 750 550 782 708 225 327 280 150 50 14 a
SC10-50/10 280 870 1.8 44 400 820 630 841 550 872 799 228 328 280 150 50 14 a
SC10-80/10 370 1210 1.4 44 475 900 630 870 550 902 829 237 338 305 150 50 14 a
SC10-100/10 400 1380 1.2 44 600 940 630 900 550 932 858 245 345 320 150 50 14 a
SC10-125/10 470 1620 1.0 48 660 940 630 980 550 1013 938 245 345 320 150 50 14 a
SC10-160/10 540 1860 0.8 48 790 1040 630 988 550 1044 946 261 361 350 150 50 14 b
4
SC10-200/10 620 2210 0.7 48 850 1040 630 988 550 1044 946 261 361 350 150 50 14 b
SC10-250/10 720 2410 0.7 48 1010 1070 750 1058 660 1104 1006 268 369 360 200 62 18 b
SC10-315/10 880 3030 0.6 48 1220 1130 750 1078 660 1139 1026 279 378 380 200 62 18 c
SC10-400/10 980 3480 0.6 48 1450 1180 750 1158 660 1219 1106 283 381 395 200 62 18 c
SC10-500/10 1160 4260 0.5 50 1750 1230 750 1293 660 1354 1239 286 384 415 200 62 18 c
SC10-630/10 1340 5130 0.5 50 2000 1290 750 1348 660 1409 1296 297 393 435 200 62 18 d
SC10-630/10 1300 5200 0.5 50 2100 1380 750 1278 660 1338 1225 301 397 465 240 62 18 d
SC10-800/10 1520 6070 0.4 6 50 2450 1460 910 1318 820 1390 1255 339 410 490 270 58 18 e
SC10-1000/10 1770 7100 0.4 50 2700 1490 910 1413 820 1485 1350 346 413 500 270 58 18 f
上表所列的外形尺寸仅供设计选型参考，最终尺寸以外形图为准。
Theoveralldimensionslistedintheabovetableareonlyforreference,thefinaldimensionswillbeindicatedin
theoutlinedrawingsupplied.
310kV 级 SC10-30～1000kVA 配电变压器外形尺寸图
SC10-30~1000kVA10kVDistributionTransformer Outline Drawing
低压端子图
LVTerminal Dimensions
410kV 级 SCB10-630～3150kVA 配电变压器
SCB10-630~3150kVA10kVDistributionTransformers
1.型号标志 SC B 10 –xxxx/ xx
Typedesignation
高压电压等级/HVClass(kV)
额定容量/Ratedcapacity(kVA)
性能水平代号/Performancestandardcode
低压箔式线圈/LVfoil-typewinding
三相环氧浇注/3phaseresin-encapsulated
2.产品标准 GB/T10228，GB1094.11，IEC60076，DIN42523
Standards
额定高压(RatedHV)：10(11、10.5、6.6、6.3、6)kV 联结组别(Connectionsymbol)：Dyn11orYyn0
