Explorer Pro工业天平使用说明书
声明：您必须遵守我们的协议，如果您下载了该资源行为将被视为对《电天下账号管理规范》全部内容的认可，本网站资源来自原创，仅供用于学习和交流，请勿用于商业用途。如有侵权、不妥之处，请举报本资源，我们将及时审核处理！
Explorer Pro工业天平使用说明书
文本预览
Explorer Pro 工业天平
使用说明书Explorer Pro 工业天平
Ohaus公司；地址：19A Chapin Road，Pine Brook，新泽西州，07058-9878，美国
一致性声明
作为Ohaus公司，我们在独自承担责任的条件下特此声明，下面列出的、带有“CE”标志的天
平型号符合这里提到的规范和标准。
天平型号：Explorer ProEP12001，EP22001，EP32001
带的标记： 规范 标准
粘贴CE标志的年份 EU 73/23 低电压 IEC1010-1 & EN60950：1992 安全
EU 89/336，92/31，93/68 性法规
电磁兼容性 EN55022：1987 放射
EN45501：1992，EN50082-1：1992
抗扰性
EU 90/384 NAWI EN45501：1992 非自动称量仪器
Ohaus公司的ISO 9001认证：
美国Ohaus公司于1994年经过Bureau Veritas Quality International（船级社砝码国际，简称为
BVQI）的检查和评估，被授予了ISO 9001合格证。这表明，美国Ohaus公司具有一个能符合国
际标准管理的砝码体系（ISO 9000系列）。BVQI定期对本公司进行重复审计，以检查砝码体系
是否能以一种正确的方式运作。
Ted Xia
总裁
Ohaus公司，Pine Brook，新泽西州
2Explorer Pro 工业天平
说明
经过鉴定的秤、用于法律应用的秤具有通用型号命名E...5 / V...5和EU型号批准（T2914）。初
次验证的年份显示在CE标志旁边。此类秤是在工厂验证的，在实际的秤和包装上都带有“M”
标志。初次验证的年份显示在CE标志旁边。如果字母M是显示在一个实体背景上，则说明此秤
可以立即投入运行。如果其背景是分开并带有阴影的，则说明此秤必须由合格的Ohaus服务人
员在使用现在进行验证。如果国际法规限制了在单独国家的验证合格证的有效期，则此类秤的
最终用户应该亲自负责在合适的时间安排重复验证。
3Explorer Pro 工业天平
注意：此设备已按照“FCC规则的第15部分”作过试验，证明它符合关于A类数字装置的极限。
这些极限的设计意图是，当设备在商业环境中操作时，提供合理的防止有害干扰的保护。本设备生成、使用并
能辐射射频能量；如果在安装和使用时未能遵守使用说明书，可能对无线电通信的有害干扰。本设备在居民区
内的操作也可能会导致有害干扰；在此情况下，用户应负责自费纠正这些干扰。
这种数字装置不会超过来自数字装置的无线电噪声放射的A类极限，此极限是由通信部的ICES-003、标题为“数
字装置”的能导致干扰的设备标准中规定的。
未经授权，严禁擅自修改或变更此设备。
4Explorer Pro 工业天平
目录表
操作键功能·······································································································································7
1．开始了解你的天平介绍···············································································································8
1.1简介·············································································································································8
2．安装············································································································································8
2.1开箱与检验··································································································································8
2.2选择放置地点······························································································································9
2.3设置和调节水平···························································································································9
2.4 连接电源··································································································································10
3．操作··········································································································································11
3.1 主菜单·····································································································································11
3.2连接电源···································································································································12
3.3 校准·········································································································································12
3.3.1 自动校准（AutoCalTM）·······································································································13
3.3.2 满量程校准···························································································································14
3.3.3 线性校准·······························································································································15
3.3.4 用户校准·······························································································································16
3.3.5 校准试验·······························································································································17
3.4 设置测量单位··························································································································18
3.4.1 定制单位·······························································································································19
3.5 基本称量··································································································································22
3.6计件称量···································································································································23
3.6.1简单计件称量·························································································································23
3.6.2高级计件称量·························································································································24
3.7 填充加样称量··························································································································25
3.8 动物称量··································································································································26
3.9 校核称量··································································································································27
3.10 微分称量································································································································28
3.11 配方·······································································································································30
3.12 快速检重称量························································································································33
3.13 统计·······································································································································34
3.14 密度·······································································································································35
3.14.1 用于密度测量的天平准备···································································································35
3.14.2 固体密度测定·····················································································································35
5Explorer Pro 工业天平
目录表
3.14.3 改善固体密度测定之结果的准确性·····················································································37
3.14.4 液体密度测定·····················································································································37
3.15 程序库···································································································································38
3.16 打印数据································································································································39
4．天平设置···································································································································41
4.1读数···········································································································································41
4.2 接口·········································································································································42
4.3 打印选项··································································································································43
4.4 设置GLP··································································································································46
4.5 设定时间/日期·························································································································47
4.6 自动校准··································································································································48
4.7 打印当前设置··························································································································49
4.8 复位·········································································································································50
4.9 锁定·········································································································································51
4.10 定制菜单································································································································52
4.11 菜单锁定保护························································································································53
4.12 贸易结算模式（LFT）···········································································································54
5．维护和保养·······························································································································55
5.1故障排除···································································································································55
5.2 RS232 接口·····························································································································56
5.3故障编码列表····························································································································59
5.4 信息报文··································································································································59
5.5 服务信息··································································································································60
5.6更换部件···································································································································60
5.7 附件·········································································································································60
使用说明书Explorer Pro 工业天平
Ohaus公司；地址：19A Chapin Road，Pine Brook，新泽西州，07058-9878，美国
一致性声明
作为Ohaus公司，我们在独自承担责任的条件下特此声明，下面列出的、带有“CE”标志的天
平型号符合这里提到的规范和标准。
天平型号：Explorer ProEP12001，EP22001，EP32001
带的标记： 规范 标准
粘贴CE标志的年份 EU 73/23 低电压 IEC1010-1 & EN60950：1992 安全
EU 89/336，92/31，93/68 性法规
电磁兼容性 EN55022：1987 放射
EN45501：1992，EN50082-1：1992
抗扰性
EU 90/384 NAWI EN45501：1992 非自动称量仪器
Ohaus公司的ISO 9001认证：
美国Ohaus公司于1994年经过Bureau Veritas Quality International（船级社砝码国际，简称为
BVQI）的检查和评估，被授予了ISO 9001合格证。这表明，美国Ohaus公司具有一个能符合国
际标准管理的砝码体系（ISO 9000系列）。BVQI定期对本公司进行重复审计，以检查砝码体系
是否能以一种正确的方式运作。
Ted Xia
总裁
Ohaus公司，Pine Brook，新泽西州
2Explorer Pro 工业天平
说明
经过鉴定的秤、用于法律应用的秤具有通用型号命名E...5 / V...5和EU型号批准（T2914）。初
次验证的年份显示在CE标志旁边。此类秤是在工厂验证的，在实际的秤和包装上都带有“M”
标志。初次验证的年份显示在CE标志旁边。如果字母M是显示在一个实体背景上，则说明此秤
可以立即投入运行。如果其背景是分开并带有阴影的，则说明此秤必须由合格的Ohaus服务人
员在使用现在进行验证。如果国际法规限制了在单独国家的验证合格证的有效期，则此类秤的
最终用户应该亲自负责在合适的时间安排重复验证。
3Explorer Pro 工业天平
注意：此设备已按照“FCC规则的第15部分”作过试验，证明它符合关于A类数字装置的极限。
这些极限的设计意图是，当设备在商业环境中操作时，提供合理的防止有害干扰的保护。本设备生成、使用并
能辐射射频能量；如果在安装和使用时未能遵守使用说明书，可能对无线电通信的有害干扰。本设备在居民区
内的操作也可能会导致有害干扰；在此情况下，用户应负责自费纠正这些干扰。
这种数字装置不会超过来自数字装置的无线电噪声放射的A类极限，此极限是由通信部的ICES-003、标题为“数
字装置”的能导致干扰的设备标准中规定的。
未经授权，严禁擅自修改或变更此设备。
4Explorer Pro 工业天平
目录表
操作键功能·······································································································································7
1．开始了解你的天平介绍···············································································································8
1.1简介·············································································································································8
2．安装············································································································································8
2.1开箱与检验··································································································································8
2.2选择放置地点······························································································································9
2.3设置和调节水平···························································································································9
2.4 连接电源··································································································································10
3．操作··········································································································································11
3.1 主菜单·····································································································································11
3.2连接电源···································································································································12
3.3 校准·········································································································································12
3.3.1 自动校准（AutoCalTM）·······································································································13
3.3.2 满量程校准···························································································································14
3.3.3 线性校准·······························································································································15
3.3.4 用户校准·······························································································································16
3.3.5 校准试验·······························································································································17
3.4 设置测量单位··························································································································18
3.4.1 定制单位·······························································································································19
3.5 基本称量··································································································································22
3.6计件称量···································································································································23
3.6.1简单计件称量·························································································································23
3.6.2高级计件称量·························································································································24
3.7 填充加样称量··························································································································25
3.8 动物称量··································································································································26
3.9 校核称量··································································································································27
3.10 微分称量································································································································28
3.11 配方·······································································································································30
3.12 快速检重称量························································································································33
3.13 统计·······································································································································34
3.14 密度·······································································································································35
3.14.1 用于密度测量的天平准备···································································································35
3.14.2 固体密度测定·····················································································································35
5Explorer Pro 工业天平
目录表
3.14.3 改善固体密度测定之结果的准确性·····················································································37
3.14.4 液体密度测定·····················································································································37
3.15 程序库···································································································································38
3.16 打印数据································································································································39
4．天平设置···································································································································41
4.1读数···········································································································································41
4.2 接口·········································································································································42
4.3 打印选项··································································································································43
4.4 设置GLP··································································································································46
4.5 设定时间/日期·························································································································47
4.6 自动校准··································································································································48
4.7 打印当前设置··························································································································49
4.8 复位·········································································································································50
4.9 锁定·········································································································································51
4.10 定制菜单································································································································52
4.11 菜单锁定保护························································································································53
4.12 贸易结算模式（LFT）···········································································································54
5．维护和保养·······························································································································55
5.1故障排除···································································································································55
5.2 RS232 接口·····························································································································56
5.3故障编码列表····························································································································59
5.4 信息报文··································································································································59
5.5 服务信息··································································································································60
5.6更换部件···································································································································60
5.7 附件·········································································································································60
AIGC"Explorer Pro"工业天平是一款专业的实验室或工业环境中使用的精密测量设备。其使用说明书通常包含以下内容概述：
1. **产品介绍**: 对Explorer Pro工业天平的型号、规格、主要功能（如最大称量范围、分度值、显示模式等）进行详细介绍。
2. **安全警告与注意事项**:
- 使用前的安全检查，包括确认电源线和地线连接正确，避免在不稳定台面上使用等。
- 防护措施，如防尘、防水、防震及温度控制范围的要求。
3. **安装步骤**:
- 天平的放置位置要求，如水平调整方法以及确保电子秤底座平稳的方法。
- 传感器和载盘的安装指导，如有无校准需求及其操作流程。
4. **操作指南**:
- 开机/关机程序，如何开启和关闭电源，以及待机、休眠状态下的操作说明。
- 称重过程：详细阐述如何放置物体、读取数值、去皮、归零等功能的操作方法和步骤。
5. **数据处理与设置**:
- 显示屏幕的各项参数解读，如单位切换、计数统计、锁定重量等功能设置。
- 数据输出格式与接口说明，如RS-232, USB或其他通信协议连接计算机进行数据导出或记录。
6. **维护保养**:
- 清洁与消毒方法，防止灰尘、油脂等影响精度。
- 维护周期与常见问题排查，如定期校准建议、异常现象判断与解决办法。
7. **故障排除**:
- 常见故障列表，针对显示屏不亮、无法称重、显示不准确等问题提供初步解决方案或故障代码解释。
8. **附录与参考信息**:
- 用户服务信息，如联系制造商的技术支持电话、邮箱地址，以及其他相关保修政策等。
总之，Explorer Pro工业天平使用说明书会详尽阐述该设备从准备到使用，再到维护保养全过程中的各项操作和注意事项，以帮助用户最大限度发挥其精确测量的功能。
