KMB、MB、SECUB金属封闭式直流开关柜 NPMPD钢轨电位限制装置 SIK箱式牵引整流变电站 UR、HPB直流快速断路器 SWS隔离开关 SEPCOS控制和保护系统 MIU10测量放大器
声明:您必须遵守我们的协议,如果您下载了该资源行为将被视为对《电天下账号管理规范》全部内容的认可,本网站资源来自原创,仅供用于学习和交流,请勿用于商业用途。如有侵权、不妥之处,请举报本资源,我们将及时审核处理!
KMB、MB、SECUB金属封闭式直流开关柜 NPMPD钢轨电位限制装置 SIK箱式牵引整流变电站 UR、HPB直流快速断路器 SWS隔离开关 SEPCOS控制和保护系统 MIU10测量放大器
文本预览
Switzerland Technology International Product
Company Profile
Changchun Urban Railway Phase 1 Project Nanjing Metro Phase 1 Project
Tianjing Urban Railway Line Jinbin Project Beijing Metro Line Batong Project
Wuhan Tramway Phase 1 Project Chongqing Tramway Line jiaoxin Phase 1 ProjectTianjin Metro Line 1 Project Tianjin Trolleybus test line Project
Guangzhuo Metro Line 4 Project Beijing Metro Line 1&2 Retrofit Project
Shanghai Metro Line 8 Project Beijing Metro Line 10 Project1
KMB
KMB Metal-enclosed DC Switchgear
2
MB
MB Metal-enclosed DC Switchgear
3
SECUB
SECUB Metal-enclosed DC Switchgear
4
NPMPD
NPMPD Over Voltage Limiting Device
5
SIK
SIK Prefabricated DC Traction Substation
6
UR & HPB
UR & HPB DC High-speed Circuit-breaker
7
SWS
SWS Disconnector
8
SEPCOS
SEPCOS Control and Protection System
9
MIU10
MIU10 Measuring AmplifierKMB
KMB Metal-enclosed DC Switchgear
1General
KMB metal-enclosed DC switchgear consists of incoming
cubicle (also called positive cubicle), feeder cubicle and
negative cubicle etc.
Incoming Cubicle
The incoming cubicle of the DC substation can be called posi-
tive cubicle, which is used between the rectifier and DC high-
speed breaker. The cubicle consists of DC disconnector or
HSCB, shunt, arrester, measure and control unit.
Feeder Cubicle
Feeder cubicle shall be installed between the positive busbar
and the point for connection of the Overhead Line(OHL). Inside
it, positive busbar, high-speed circuit-breaker and relevant con-
trol and protection components shall be provided.
The feeder cubicle is equipped with trolley type DC high-speed
circuit breaker. The trolley can be easily pulled out or moved in.
The trolley has three significant positions: Connected, Test and
Disconnected.
Feeder cubicles are metal-enclosed withdrawable switchgear.
It can be opened from the front or the rear of the cubicle with
lockable doors, allowing easy maintenance. The cubicle con-
sists of rear compartment, trolley compartment and low-voltage
compartment.
Negative Cubicle
Negative cubicle, which is equipped with motorized or manual
DC disconnector, is made of 2mm bent and reinforced steel
plates. In front and rear of the cubicle, the metal door can be
locked.
A set of a frame leakage protection device can be installed in
the negative cubicle to prevent personnel from injury due to
the flashover of the DC equipment by the damage of its inter-
nal insulation. It is mainly used for ensuring personal safety
and protection of the equipment against some special troubles.
Operation Conditions
Altitude: 2000m;
Temperature: -5 +40
Relative humidity:
Ambient air humidity shall not exceed 50% when the highest tem-
perature is +40 . But when the temperature is low, it allows consid-
erable relative humidity, for example, 90% at +20 ;
Installation condition:
During the installation of the equipment, the gradient shall not ex-
ceed 5 degree, and all of the switchgears shall be arranged orderly;
Installation site:
The switchgear should be installed at the site where are no acutely
strike or shake; in no case the equipment should be exposed to rain
or bad weather conditions.
1.1Main Features
High protection degree and perfect solution.
Integrated trolley with high speed circuit breaker and easy to
maintenance.
Disconnectors or reversing switches are accessible and suit
able for operation from the cubicle front or rear side.
Integrated protection and control system type SEPCOS,
allowing both remote control and remote monitoring from
the traction network control centre.
The control and protection compartment is accessible from
the cubicle front side.
Technical data
KMB06 KMB08 KMB08
Type 26 40 46 60 26 40
(A) 2000-3150 4000-9000 4000-9000 6000-9000 2000-3150 4000-6000
Rated current bus-bar
(A) 2600 4000 4600 6000 2600 4000
Rated current feeder circuit
Ui 1600V/3000V 4800V
Company Profile
Changchun Urban Railway Phase 1 Project Nanjing Metro Phase 1 Project
Tianjing Urban Railway Line Jinbin Project Beijing Metro Line Batong Project
Wuhan Tramway Phase 1 Project Chongqing Tramway Line jiaoxin Phase 1 ProjectTianjin Metro Line 1 Project Tianjin Trolleybus test line Project
Guangzhuo Metro Line 4 Project Beijing Metro Line 1&2 Retrofit Project
Shanghai Metro Line 8 Project Beijing Metro Line 10 Project1
KMB
KMB Metal-enclosed DC Switchgear
2
MB
MB Metal-enclosed DC Switchgear
3
SECUB
SECUB Metal-enclosed DC Switchgear
4
NPMPD
NPMPD Over Voltage Limiting Device
5
SIK
SIK Prefabricated DC Traction Substation
6
UR & HPB
UR & HPB DC High-speed Circuit-breaker
7
SWS
SWS Disconnector
8
SEPCOS
SEPCOS Control and Protection System
9
MIU10
MIU10 Measuring AmplifierKMB
KMB Metal-enclosed DC Switchgear
1General
KMB metal-enclosed DC switchgear consists of incoming
cubicle (also called positive cubicle), feeder cubicle and
negative cubicle etc.
Incoming Cubicle
The incoming cubicle of the DC substation can be called posi-
tive cubicle, which is used between the rectifier and DC high-
speed breaker. The cubicle consists of DC disconnector or
HSCB, shunt, arrester, measure and control unit.
Feeder Cubicle
Feeder cubicle shall be installed between the positive busbar
and the point for connection of the Overhead Line(OHL). Inside
it, positive busbar, high-speed circuit-breaker and relevant con-
trol and protection components shall be provided.
The feeder cubicle is equipped with trolley type DC high-speed
circuit breaker. The trolley can be easily pulled out or moved in.
The trolley has three significant positions: Connected, Test and
Disconnected.
Feeder cubicles are metal-enclosed withdrawable switchgear.
It can be opened from the front or the rear of the cubicle with
lockable doors, allowing easy maintenance. The cubicle con-
sists of rear compartment, trolley compartment and low-voltage
compartment.
Negative Cubicle
Negative cubicle, which is equipped with motorized or manual
DC disconnector, is made of 2mm bent and reinforced steel
plates. In front and rear of the cubicle, the metal door can be
locked.
A set of a frame leakage protection device can be installed in
the negative cubicle to prevent personnel from injury due to
the flashover of the DC equipment by the damage of its inter-
nal insulation. It is mainly used for ensuring personal safety
and protection of the equipment against some special troubles.
Operation Conditions
Altitude: 2000m;
Temperature: -5 +40
Relative humidity:
Ambient air humidity shall not exceed 50% when the highest tem-
perature is +40 . But when the temperature is low, it allows consid-
erable relative humidity, for example, 90% at +20 ;
Installation condition:
During the installation of the equipment, the gradient shall not ex-
ceed 5 degree, and all of the switchgears shall be arranged orderly;
Installation site:
The switchgear should be installed at the site where are no acutely
strike or shake; in no case the equipment should be exposed to rain
or bad weather conditions.
1.1Main Features
High protection degree and perfect solution.
Integrated trolley with high speed circuit breaker and easy to
maintenance.
Disconnectors or reversing switches are accessible and suit
able for operation from the cubicle front or rear side.
Integrated protection and control system type SEPCOS,
allowing both remote control and remote monitoring from
the traction network control centre.
The control and protection compartment is accessible from
the cubicle front side.
Technical data
KMB06 KMB08 KMB08
Type 26 40 46 60 26 40
(A) 2000-3150 4000-9000 4000-9000 6000-9000 2000-3150 4000-6000
Rated current bus-bar
(A) 2600 4000 4600 6000 2600 4000
Rated current feeder circuit
Ui 1600V/3000V 4800V
AIGC
这些是电气行业中的相关设备与组件:
1. KMB 和 MB: KMB 和 MB 可能代表两种不同型号或系列的金属封闭式(Metal-Enclosed)直流开关柜。这类开关柜通常用于直流电力系统中,提供可靠的高压直流馈线和母线连接,对直流电路进行开合操作和保护。
2. SECUB 金属封闭式直流开关柜: SECUB 是另一种类型的金属封闭式开关柜,专门设计用于直流供电系统,具备较高的安全性和可靠性,能够隔离和分配直流电源至各个负载或子系统。
3. NPMPD 钢轨电位限制装置: NPMPD (Negative Polarity Miniature Protection Device) 是一种安装在铁路接触网系统中的设备,用于防止接触轨对车轮形成的危险电压,确保人员和设备的安全。
4. SIK 箱式牵引整流变电站: SIK 可能是指一种采用箱式结构的牵引整流变电站,将交流电转换为适合轨道交通车辆使用的直流电,并且集成有冷却系统和监控设备,实现高效、稳定的电力供应。
5. UR、HPB 直流快速断路器: UR 和 HPB 分别代表不同型号或系列的直流快速断路器,它们能够在短时间内切断短路电流,保护电力系统的安全稳定运行。
6. SWS 隔离开关: SWS 隔离开关是一种常用于直流和交流配电系统的电器元件,主要用于隔离电源、分合小电流电路以及形成明显的电气间隔。
7. SEPCOS 控制和保护系统: SEPCOS 是一套由西门子公司提供的直流电力电子控制系统,它集成了控制、保护、监测等多种功能,广泛应用于直流输电、电力储能等场合,以提高电网运行效率和安全性。
8. MIU10 测量放大器: MIU10 是一款高精度的测量放大器,常用于电力系统中对电流、电压信号的检测与处理,可将微弱的信号放大到便于后续测量和控制设备读取的适当范围。